|Product Name:||KSD301 Thermal Protector||Operating Temperature:||0℃~250℃|
|Electrical Rating:||10A 250V||Life Time:||100,000 Cycles|
|Dielectrical Strength:||AC 1,450V For 1 Min.||Insulation Resistance:||100MΩ Or More(DC 500V)|
|Circuit Resistance:||50mΩ Or Less||Case:||Ceramic|
Coffee Maker Ksd301 Thermostat,
Ksd301 adjustable bimetal thermostat,
250v 10a adjustable bimetal thermostat
Thermostat Ksd301 250v/10a For Coffee Maker
1. What is KSD301 Snap-action thermostat?
KSD301 series snap-action thermostat is a kind of miniature hermetically sealed bimetal thermal protector (1/2" disc).
It is of single-pole single-throw structure and works under resistive load.
KSD301 series is in wide use in a great variety of compact type home appliances, such as coffee maker, water dispenser, toaster, microwave oven, electric pad and portable icebox etc., to provide temperature control or temperature protection.
2. Parameters and Specification.
|Use||Temperature control/Overheat protection|
|Appliance||Coffee maker/ Drinking machine/toaster/Microwave oven/ Heating/ Portable Refrigerator/etc|
|Base material||Ceramic base|
|Max. Operating Temperature||220°C|
|Differential||Refer to the regulation|
|Tolerance||Refer to the regulation|
|Dielectric Strength||Parts between electriferous components and non-electriferous ones can bear 2000V (3750V for Reinforced insulation type) 50Hz AC current, which is nearly sine wave, for one minute as bearing test. Resulted no breakdown, no flashover.|
|With a DC 500V megger, borne DC 500V, the tested value is over 10MW.|
Resistance Between Terminals
Normal type: OFF temperature higher than ON temperature.(Normal close)
|Maximum ambient temperature||
Diameter of bimetal disc
|Terminal type||Customized (Refer to our specification)|
|Cover/Bracket||Customized (Refer to our specification)|
If the picture product could not meet your demand, kindly refer to below KSD301 Thermostat Specification.
There are some common choices for thermostat components, you can choose the type you want, or share with us you requirements, such as action temperature, spec of component bracket, terminal, cap, etc. We will support customized production.
3. Attentions about KSD301 Thermostat.
1) When select thermostat, need to confirm the accurate temperature. To avoid temperature changes caused by thermal inertia, thermal conduction and other factors, need to consider the following factors.
a. Detection part of temperature control.
b. Thickness and material of heat transfer component.
c. The power of the heating element.
d. Amount of heated medium.
e. Ambient temperature and air pressure.
2) During thermostat using process, need to avoid moisture and pollution, otherwise it will affect the electrical performance of the product. Recommended thermostat switch working environment is that relative humidity ≤90%, no contact with corrosive and flammable things.
3) During installation, need to make sure the thermostat’s temperature-sensing surface to be evenly contacted with the temperature-controlling part, and the force should be evenly applied to stabilize the temperature-sensing. Besides, need to coat the surface of temperature-sensitive with thermal grease or other similar heat-conducting medium.
Q1: How can we get a quote?
A: Please offer the specification of the KSD301 thermostat, such as operating temperature, case/bracket style, application, quantity etc.
Picture and drawing are welcome for our reference. We will provide the best price after then.
Q2: How can we get a drawing.
A: After confirm the detail specification, we will provide the drawing via E-mail, WhatsApp, Wechat and other ways.
Q3: What is the MOQ?
A: Normally our MOQ is 1000 pcs. Larger quantity could win better price. We can also support small quantity for test or pilot run purpose.
Q4: What about the lead time?
A: For sample production, it usually takes around 7 days.
Lead time would be 10~20 days with long term forecast.
Estimated lead time would be around 30 days without forecast.
We will try best to shorten the lead time for the urgent order.
Q5: Which payment terms you can accept?
A: T/T or pay via PayPal in advance, could talk based on customer actual status.
Q6: Package carton dimension.
A: For 1000pcs, use 38*29*25mm carton.
For 2000pcs, use carton which dimension 56*38*25mm or 41*30*21mm.
Q7: Express or Forwarder for delivery.
A: Customer could assign express or forwarder for delivery, or we ask our source to do it if more cost-saving.
Thanks for your time, kindly contact us via below ways,
Sales: Thomas Lee
Tel: +86 138 6234 1050
WhatsApp: +86 15850802713
Contact Person: sales