company news about How to use the CM Multifunction Electrical Counter Meter?

Using the CM multifunction counter is simple and efficient for applications such as counting, timing, and output control. Here’s how:

1. Wiring Setup: Connect sensors, relays, or signal inputs to the CP1/CP2 terminals, and output devices to AL1/AL2. The meter supports both high-level (3–30VDC) and low-level (0–2VDC) input signals.

2. Mode Setting: Use dial switches or front-panel buttons to configure the input mode (A/B/C/D) and output mode (F, N, C, R, etc.). No programming is required.

3. Counting/Timing Selection: You can switch between counting mode and timing mode through internal settings or switch selection.

4. Start Operation: Once powered on, the meter will start counting or timing based on input pulses and execute output control (e.g., relay drive or alarm).

5. Power-Fail Memory: Built-in memory stores data up to 10 years in case of power failure.