|Factory:||Light Country(Changshu) Co., Ltd.||Product Name:||Manual Reset Bimetal Thermostat|
|Electrical Rating:||10A 250V, 16A 250V, 15A 125V||Action Temperature:||-10℃~180℃|
Manual reset thermostat is one of a temperature controller. As the working ambient temperature changes to the set temperature, physical deformation and some other special effects happen inside the switch automatically, to turn off the circuit, to protect the whole machine unit and operators. It need to be reset manually.
1. Why choose Manual Reset Bimetal Thermostat?
1) High sensitivity, rapid heat transmission, for excellent temperature control.
2) Easy mounting.
3) Many choices for thermosat components, always support customized production.
4) All finish goods will be tested before shipping, high pass rate.
2. Parameters and Specification.
|Action Type||Manual Reset|
|Electrical Rating||10A 250V, 16A 250V, 15A 125V.|
10~30K(15K is the standard)
|Terminal Material||Copper with tin plated|
|Circuit Resistance||50mΩ or less|
|Insulation Resistance||100MΩ or more(DC 500V)|
|Dielectric Strength||AC 1,450V for one minute|
|Application||Hot melt machine|
When using manual reset bimetal thermostat, recommend to choose following wires considering rated current:
|Traverse area||0.3 mm²||0.5 mm²||0.75 mm²||1.25 mm²|
|UL wire gauge||AWG22||AWG20||AWG18||AWG16|
|UL wire gauge||AWG14||AWG12||AWG10||
3. Attentions about Manual Reset Bimetal Thermostat installation.
1) During installation, need high attention that the temperature-sensitive surface should not be deformed, and the top of the cap should not be collapsed or deformed, so as not to affect the temperature performance and electrical performance of the product.
2) Manual Resest thermostat shall be installed with cap connected with the grounding metal parts or the power grounding wire of the equipment to reduce the electromagnetic radiation and interference signals of the complete machine.
3) During Manual Reset thermostat using process, need to avoid moisture and pollution, otherwise it will affect the electrical performance of the product. Recommended thermostat working environment is that relative humidity ≤90%, no contact with corrosive and flammable things.
4) Manual reset series thermostats can only be reset after the temperature drops at least 20℃; And when reset, the force should be moderate, to just can make the thermostat reset as appropriate (about 5~6N), otherwise there is an impact on the temperature.
4. If the picture product could not meed your demand, please refer to below KSD301 Thermostat Specification for some common components for best price support. Kindly share your specification details such as action/reset temperature, bracket, terminal types... with us. We will support customized production.
5. About us.
Light Country was founded in 1985 in Taiwan.
We dedicate on bimetal thermostat and rocker switch.
These parts are widely used in household appliance, motor vehicles, industrial facilities, medical devices, etc.
To provide customer best service, we’re with integration of R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO certificates, comply with ROHS/REACH regulations.
We promise high quality products, timely delivery, attentive service, effective improvements.
We deserve your trust.
Thanks for your time, please feel free to contact us via below ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: firstname.lastname@example.org or email@example.com
WhatsApp: +86 15850802713
Contact Person: sales